Switching From Handset To Speakerphone Mode; Switching From Speakerphone Mode To The Handset - Unify OpenScape Desk Phone IP 55G User Manual

Basic functions
Speaker
Switching from handset to speakerphone
mode
Take note of the two different processes and activate your preferred set-
ting as appropriate
Prerequisite: You are conducting a call via the handset and the microphone and
loudspeaker functions have been activated by administrator.
Open listening in standard mode
]
Hold down the key and replace the handset. Then release the key and proceed
and
with your call.
Open listening in US mode
If open listening is set to US mode, you do not have to hold down the loudspeak-
er key when replacing the handset to switch to speakerphone mode.
Press the key shown.
Speaker
]
Replace the handset. Proceed with your call.
Secure voice communication is indicated by a normal padlock icon on the
or
graphic display; unsecured voice communication is indicated by a struck-
through padlock icon on the graphic display (see also
Switching from speakerphone mode to the
handset
Prerequisite: You are conducting a call in speakerphone mode.
^
Lift the handset.
The key shown is no longer lighting.
Speaker
Page 221.

53
Page 48)
