Automatic Call Recording; Manual Call Recording; Call Recording With Autostart - Unify OpenScape Desk Phone IP 55G User Manual

240
Record on
Record off
]
or

Automatic call recording

This is the simplest mode. If you have accepted a call or called a subscriber and
the subscriber answers, the call is recorded automatically. Refer to
to check which calls this can be.
As soon as the recording starts, you will see the recording symbol
a beep (see also
You cannot pause the recording manually in this mode.

Manual call recording

Activating or deactivating call recording when the telephone is in
idle mode.
Prerequisite: Manual mode is selected. The recording button is configured and
indicates the status.
Select the option shown in the telephone's context menu to enable the option
or disable the option.
or
Press the recording button to enable the option - the LED key lights up
or press the key shown to disable the option - the LED extinguishes.
The recording button also indicates the status change if you activated or deacti-
vated call recording via the context menu.

Call recording with AutoStart

Standby mode is activated in principle in idle mode. The recording button LED
lights up. You cannot switch off the recorder. As soon as a call is set up, call re-
cording starts automatically.
^
Lift the handset.
or
Press the key shown.
Speaker
[
The station answers. You hear a beep, the recording symbol
display and the recording button LED remains lighting. The call is now being re-
corded. (see also
You can pause the recording at any time and continue it again.
If you end the call, the AutoStart process is set up again for the next call.
Speaker
Page 239).

Page 239)

Call recording
Page 238

|
and hear
|
is shown on the