Putting A Line On Hold Manually During The Recording - Unify OpenScape Desk Phone IP 55G User Manual

244

Putting a line on hold manually during the recording

There are two options for placing a line manually on hold:
• You place the active line on hold during the call recording and then resume the
call on this line.
• You seize a different line during call recording. The first line is placed on man-
ual hold.
Prerequisite: The telephone has more than one line configured. The active call
is being recorded. The recording button LED is lighting.
Holding and retrieving the call on the line
[
You are conducting a call, for example on line A. You hear a beep and the re-
cording symbol
Press line key A. The line key LED starts flickering. The call is now on hold. The
recording is paused while the call is on hold. The recording symbol
display disappears.
Retrieving a held call
Press line key A. The line key LED lights up. The call is retrieved. You hear a
beep and the recording symbol
is continued.
Holding a call on the line and conducting a call on a different line
Press line key B – the LED lights up. You hear a beep and the recording symbol
|
is shown on the display for line B – this call on line B is being recorded. Line
A is placed on hold, call recording of line A has been terminated.
Press line key A to resume the call. You hear a beep and the recording symbol
|
is shown on the display for line A – a new recording of line A commences.
|
is shown on the display. The call is now being recorded.
|
is shown on the display again. Call recording
Call recording
|
on the