System Conference - Unify OpenScape Desk Phone IP 55G User Manual

Enhanced phone functions
Consult
Exit Conference

System conference

This type of conference is also referred to as a large conference. It can include
up to 16 parties.
Prerequisite: You are conducting a consultation call
cepted a second call
figured by your administrator.
Establishing a conference
Press the key shown. You are connected to the first two parties at once. The con-
Conference
ference is displayed with the current participants. You can now:
• initiate a consultation call
• add a party
• put the conference on hold
• leave the conference.
Conducting a consultation call
Select the softkey to confirm. 
or
Press the key shown. If the party answers, you can:
Conference
• toggle between the party and the conference
• connect the consultation call to another called party
• end the consultation call and return to the conference
• add the consultation call party to the conference.
If you want to use the phonebook or a call list for a consultation call,
press the Hold key and then open one of the phonebooks or a required
call list (
Alternatively you open one of the phonebooks or a call list without using
the Hold function – the conference is automatically put on Hold.
Adding a party
Prerequisite: You are conducting a consultation call and the conference is on
hold.
Press the key shown. The party is added to the conference. Only the conference
Conference
and all current participants are now displayed.
Putting the conference on hold
Press the key shown. The conference is placed on hold and you can consult with
Hold
someone in your office, for instance.
Leaving a conference
Select the softkey to confirm. You are disconnected from the conference call and
can dial another number, for instance. The other call partners remain connected.
Page 107 and the "system conference" feature was con-

Page 153).

123
Page 67 or you have ac-
