Incoming Calls; Answering A Call Via The Handset; Answering A Call Via The Loudspeaker (Speakerphone Mode) - Unify OpenScape Desk Phone IP 55G User Manual

Basic functions
if nec.
Vol.-
Accept
if nec.
Vol.-

Incoming calls

The OpenScape Desk Phone IP55G rings with the tone signal set when an in-
coming call is received. The call is also visually signalled on the call display. If
information on the calling party (name, phone number) is transmitted, it will ap-
pear on the graphic display.
If you have set a pattern melody
your phone, administrator may have preset a different ringtone or deacti-
vated the ringtone, depending on the call type (e.g. an external or internal
call).
Any settings you are currently making on the phone will be interrupted by
an incoming call. As soon as the call ends, press the Services key to re-
turn to the point in the menu structure where you were interrupted.

Answering a call via the handset

The phone rings. The caller is displayed.
If the phone number is stored in the local telephone, the associated name
is shown on the display (must be activated by administrator).
^
Lift the handset.
Adjust the speaker volume
Vol.+
Answering a call via the loudspeaker (speakerphone
mode)
The phone rings. The caller is displayed.
The context menu display changes:
Select the softkey to confirm. The Speaker key lights up.
or
Press the key shown. The key lights up. The speakerphone function is activated.
Speaker
Adjust the call volume.
Vol.+
Page 220 or a ringtone

49
Page 219 on
