Unify OpenScape Desk Phone IP 55G User Manual page 108

108
Disconnect & return
Ignore
Reject
Disconnecting the second call
Select the softkey in the second call to confirm. The call to this station is discon-
nected and the call to the first station is reconnected.
Ending the second call by hanging up
If you or the second call partner hangs up, you will be prompted to retrieve the
first call again if "Hold and hang-up" is disabled (
first call will remain on hold until you receive this prompt after a defined time in-
terval.
Ignoring the second call
Prerequisite: You are conducting a call and call waiting is allowed
A second call rings.
Select the softkey to confirm.
The caller still hears the on-hook signal. You can subsequently Accept, Reject
or Deflect the second call for a brief time.
While the ignored second call continues to wait, from the active call you can:
• make a consultation call
• initiate a conference
• toggle between the consultation call and your call partner
• transfer a call
A third call would be rejected with the busy signal. If you have disconnected the
first call, the ignored second call rings like a normal call.
Rejecting a second call
Prerequisite: You are conducting a call and call waiting is allowed
A second call rings.
Select the softkey to confirm.
The second call is rejected. The caller hears the busy signal. The caller's phone
number is added to the missed calls list.
Enhanced phone functions
Page 105). Otherwise, the

Page 109.

Page 109.
