Configuring A Fixed Forwarding Key - Unify OpenScape Desk Phone IP 55G User Manual

Programmable function keys
Normal
Feature toggle
Label
Setting
Save & Exit
Normal
CF unconditional
Hold down the key you want to assign a function to until the programming
prompt is displayed.
If the prompt is not displayed or a programmed function is not executed,
you can only launch key programming via the user menu (ask your admin-
istrator about the current setting).
Confirm to begin programming. The function key illuminates continuously.
OK
Select and confirm the option shown.
Select and confirm the required function in the context menu.
Select and confirm to change the key labelling.
j
Enter and confirm the key label you want (e.g. "busy/free").
Select and confirm this option to enter the relevant code.
j
Enter the code (see Code list table
Select the softkey to confirm.

Configuring a fixed forwarding key

Hold down the function key to which a function should be assigned until the pro-
gramming prompt is displayed.
If the prompt is not displayed or a programmed function is not executed,
you can only launch key programming via the user menu (ask your admin-
istrator about the current setting).
Confirm to begin programming. The function key illuminates continuously.
OK
Select and confirm the option shown.
Call forwarding depending on the forwarding type
Select a forwarding type:
• CF unconditional
• CF no reply
• CF busy
Select and confirm the required function.
Page 201) and confirm.

95