Cti Calls - Unify OpenScape Desk Phone IP 55G User Manual

114
User
Configuration
Incoming calls

CTI calls

AutoAnswer
Yes
AutoAnswer beep
Yes
Save & Exit
CTI calls
Beep on auto-answer
When you dial a number with a CTI application (e.g. Outlook) and auto-answer
is activated, the phone switches automatically to speakerphone mode. If auto-
answer is deactivated, the phone first rings and you have to press the loud-
speaker key or lift the handset in order to set up the call. This setting also defines
whether or not incoming calls are automatically accepted. If the function is ac-
tive, an alert beep sounds when a call is automatically accepted. Details regard-
ing special application are provided on
Information on the operation of the configured CTI application can be found in
the corresponding operating instructions.
z
You can also configure this setting via the WBM interface
Prerequisite: The option was programmed by your administrator.
Press the key shown until the "Settings" tab is active.
Services
Confirm the option shown.
j
Enter and confirm the user password.
if nec.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select the softkey to confirm.
Enhanced phone functions
Page 132.

Page 247.
