Direct Station Selection Keys; Calling A Station Directly - Unify OpenScape Desk Phone IP 55G User Manual

Making calls with multiple lines
DSS call 1

Direct station selection keys

Apart from line keys, administrator can also configure direct station selection
(DSS) keys. You can use a DSS key to call an internal station directly, pick up
calls for this station or forward calls directly to it.

Calling a station directly

You cannot use DSS if the user is on another call (flashing LED).
Calling from the idle menu
Press the relevant DSS key.
or
Press the key shown until the "Overview" tab is active.
Phone
Select and confirm the DSS line. The key lights up and the connection is estab-
lished via the primary line.
Administrator can configure the DSS key so that the connection is also es-
tablished when the DSS station has activated "Do not disturb" or call for-
warding.
Consultation with the DSS station
Prerequisite: You are conducting a call and your administrator has configured
the DSS key for consultation.
Press the relevant DSS key for the consultation. The key lights up and a connec-
tion is established. If the station answers, you can toggle, transfer the first call or
initiate a conference.
If administrator has configured transfer instead of consultation, you can
only transfer the current call to the DSS station.
131