Redial - Unify OpenScape Desk Phone IP 55G User Manual

Basic functions
Niels, Bohr18.10. 07:06am
^
or

Redial

Redial
Redial
You must have activated the call journal in order to use the call list. This
also applies for redialling the last number dialled
journal is not activated, the message "Call Log is disabled" is shown on the
display when you press the w key. If you try to perform a last number re-
dial using a programmed function key, the message "Key function unavail-
able" is shown on the display in this case.
If you still want to access the function for redialling the last number dialled
despite having disabled the call journal, you can alternatively use the
OpenScape Voice "last caller redial" function, assuming this function has
been activated by the administrator
Redialling from the call list
Only calls to the primary line are recorded on multi-line phones
Page 14.

Press the key repeatedly until the "Dialled" tab appears.
Call Log
Select and confirm the entry you want. The phone number associated with the
list entry is dialled.
Redialling using softkeys
Lift the handset or press the key shown.
Speaker
Select the softkey to confirm. The last phone number entered is dialled.
Redialling from the idle menu
Select and confirm the softkey in the idle mode (
number entered is dialled.

Page 163. If the call

Page 200.

Page 29). The last phone

65