Configuring Call Forwarding; Placing A Call On Hold - Unify OpenScape Desk Phone IP 55G User Manual

Enhanced phone functions
User
Configuration
Incoming calls
Forwarding
Settings
Alerts
Visual alerts
Yes
Audible alerts
Yes
Forwarding station...
Display last
Save & Exit

Configuring call forwarding

The call forwarding settings can also be entered via the Forwarding key
( Page 78).

z
You can also configure this setting via the WBM interface
Press the key shown until "Settings" is active.
Services
Confirm the option shown.
j
Enter and confirm the user password.
if nec.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Configuring call forwarding
Select and confirm the option shown.
For a description of the settings, see section "Standard call forwarding"
Page 77 or "Call forwarding by call type"

Setting alerts
Use the Call forward alerts menu to enable and disable visual and audible alerts
for call forwarding (not possible with the Forwarding key).
Select and confirm the option shown.
Select the option shown.
Select and confirm Yes/No in the context menu.
or
Select the option shown.
Select and confirm Yes/No in the context menu.
or
Select the option shown.
Select and confirm Display last/Display first in the context menu.
Select the softkey to confirm.

Placing a call on hold

You can use this function to place an ongoing call on hold, for instance to pre-
vent the other party overhearing a conversation with a colleague in the same
room. The held party hears music on hold if Music on hold is active on this par-
ty's phone

Page 106.
Page 247.

Page 84.

101