Ending A Consultation Call - Unify OpenScape Desk Phone IP 55G User Manual

68
Drop & return
Retrieve

Ending a consultation call

You end the consultation
Select the softkey to confirm.
The consultation call is disconnected. The call with the first party is resumed.
The second party hangs up
If the second party hangs up, you will be prompted to retrieve the first call again
if "Hold and hang-up" is disabled (
main on hold until you receive this prompt after a defined time interval.
Select the softkey to confirm. You are reconnected with the first party.
If the call is kept on hold, you can retrieve the call via the softkey before
the set time expires.
Ending the consultation with an active headset
Prerequisite: The administrator has additionally configured a key with the "Au-
to-Headset" function (AICS Zip tone) (
Press the "Auto-Headset" function key to activate automatic call answering. This
key and the headset key illuminate.
[
You are conducting a consultation call and the second party hangs up. You are
automatically reconnected with the waiting first party. The prompt "Retrieve"
does not appear.
Page 105). Otherwise, the first call will re-

Page 92).

Basic functions