Activating/Deactivating Call Forwarding - Unify OpenScape Desk Phone IP 55G User Manual

82
Settings
g

Unconditional 3338
Activate

Activating/deactivating call forwarding

Prerequisite: A forwarding destination is already configured for the relevant for-
warding type.
Press the key shown.
Forward
The message:
"Set forward on to" is displayed with the last forwarding destination used. The
Softkey-Liste offers the following options:
• Accept
• Enter dest.
• Settings
• Cancel
Select the softkey to confirm.
Choose one of the forwarding types offered:


Unconditional (default setting is off)


Busy


No reply (after {1}s)
Here for instance Unconditional.
Select the softkey to confirm your selection. The forwarding type is activated or
deactivated.
The call forwarding settings can appear as follows:


Unconditional (default setting is off)


Busy


No reply (after {1}s)
Press to open the call view. If Unconditional was activated, the forwarding des-
Phone
tination is displayed with the forwarding icon and the Forward key illuminates.
The Busy and No reply (after {1}s) types of call forwarding are not displayed.
Call forwarding