Connecting Power - Avaya 120 Series Installing

Installation
Procedure
1. Connect the network cable to the RJ45 port on the system.
2. Connect optional peripherals using the USB ports on the system.
3. Connect an optional management device using the console port on the system.

Connecting power

About this task
Use this procedure to connect power to the system.
Note:
A region-specific power cable is shipped separately from the server package based on what
was entered in the Configurator Tool.
Before you begin
Ensure the system has been installed and secured before you attach cables. Ensure you have
take precautions against electrostatic discharge before you begin. See the following sections for
more information:
• Installing the server
• Electrostatic discharge
December 2018
on page 19
on page 17
Installing the Avaya Converged Platform 120 Series
Comments on this document? infodev@avaya.com
24