Network - Motorola WiNG 5 System Reference Manual

13 - 94 WiNG 5 Access Point System Reference Guide
Ping Mode
State
Refresh

13.3.17 Network


Access Point Statistics
Use the Network screen to view information for ARP, DHCP, Routing and Bridging. Each of these screen provide
enough statistics to troubleshoot issues related to the following features:
• ARP Entries
• Route Entries
• Bridge
• IGMP
• DHCP Options
• Cisco Discovery Protocol
• Link Layer Discovery Protocol
Describes the ping mode as either:
arp-only – Uses the Address Resolution Protocol (ARP) for only pinging the
critical resource. ARP is used to resolve hardware addresses when only the
network layer address is known.
arp-icmp – Uses both ARP and Internet Control Message Protocol (ICMP) for
pining the critical resource and sending control messages (device not
reachable, requested service not available, etc.).
Defines the operational state of each listed critical resource.
Select the Refresh button to update the screen's statistics counters to their
latest values.