Motorola WiNG 5 System Reference Manual page 749

6. The User Details field displays the following:
Username Displays the unique name of the administrator or operator managing the
client's connected access point.
Authentication Lists the authentication scheme applied to the client for interoperation with
the access point.
Encryption Lists the encryption scheme applied to the client for interoperation with the
access point.
Captive Portal Displays whether captive portal authentication is enabled (True of False).
Authentication
7. The RF Quality Index field displays the following:
RF Quality Index Displays information on the RF quality for the selected wireless client. The RF
quality index is the overall effectiveness of the RF environment as a
percentage of the connect rate in both directions, as well as the retry and
error rate. RF quality index can be interpreted as:
• 0 – 20 (Very poor quality)
• 20 – 40 (Poor quality)
• 40 – 60 (Average quality)
• 60 – 100 (Good quality)
Retry Rate Displays the average number of retries per packet. A high number indicates
possible network or hardware problems.
SNR Displays the signal to noise ratio of the connected wireless client.
Signal Displays the power of the radio signals in dBm.
Noise Displays the disturbing influences on the signal by interference of signals in
dBm.
Error Rate Displays the number of received bit rates altered due to noise, interference,
and distortion. It's a unitless performance measure.
8. The Association field displays the following:
AP Displays the name of the wireless client's connected access point. Click on
the access point to view information in greater detail.
Radio Number Displays the access point's radio number to which the selected wireless client
is associated. AP-6511 and AP-6521 models have one radio, AP-6532 and
AP-7161 models have 2 radios and AP-7131 models have from 1-3 radios
depending on the selected SKU.
Radio Type Displays the radio type. The radio can be 802.11b, 802.11bg, 802.11bgn,
802.11a or 802.11an.
Statistics 12 - 143