Motorola WiNG 5 System Reference Manual page 524

Table of Contents

Advertisement

9 - 32 WiNG 5 Access Point System Reference Guide
VLAN
WLAN SSID
Rate Limit from Air
Rate Limit to Air
Management Group
Role
5. Set the
Schedule
Time Start
Time Stop
Days
6. Click the
Select this option (and use the slider) to assign a specific VLAN to this RADIUS
user group. Ensure Dynamic VLAN assignment (Single VLAN) is enabled for the
WLAN for the VLAN to work properly. For more information, see
Basic WLAN Configuration on page
Assign a list of SSIDs (users) the RADIUS group are allowed to associate to.
An SSID cannot exceed 32 characters. Assign WLAN SSIDs representative of
users a guest user will need to access. The parameter is not available if this
RADIUS group has been defined as a management group.
Select the checkbox to set an uplink rate limit for managed clients within this
RADIUS group. Use the spinner to set value from 100-1,000,000 kbps. Setting
a value of 0 disables rate limiting.
Select the checkbox to set a downlink rate limit from clients within this
RADIUS group. Use the spinner to set value from 100-1,000,000 kbps. Setting
a value of 0 disables rate limiting.
Select this option to designate the RADIUS group as a management group. If
set as management group, assign a role to the members of the group using the
Access drop-down menu, allowing varying levels of administrative rights. This
feature is disabled by default.
If a group is listed as a management group, assign a unique role. Available
roles include:
monitor - Read-only access.
helpdesk - Helpdesk/support access
network-admin - Wired and wireless access
security-admin - Grants full read/write access
system-admin - System administrator access
to configure access times and dates.
Use the spinner control to set the time (in HH:MM format) RADIUS group
members are allowed to login and access RADIUS server resources (for
example, 14:45 = 2:45). Select either the AM or PM radio button to set the time
as morning or evening.
Use the spinner control to set the time (in HH:MM format) RADIUS group
members are denied access to RADIUS server resources (for example, 15:45 =
3:45). Select either the AM or PM radio button to set the time as morning or
evening. If already logged in, the RADIUS group user is deauthenticated from
the WLAN.
Select the day(s) of the week RADIUS group members can access RADIUS
resources.
OK
to save the changes. Select
6-4.
Reset
to revert to the last saved configuration.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents