Table of Contents
Advertisement
DHCP Client Default
Route Priority
Enable Routing Failure
11. Select the
OK
button located at the bottom right of the screen to save the changes and overrides. Select
revert to the last saved configuration.
Use the spinner control to set the priority value (1 - 8,000) for the default
route learnt from the DHCP client. The default setting is 1000.
When selected, all default gateways are monitored for activity. The system
will failover to a live gateway if the current gateway becomes unusable. This
feature is enabled by default.
Device Configuration 5 - 239
Reset
to
Hide quick links:
Advertisement
Table of Contents
