Motorola WiNG 5 System Reference Manual page 510

9 - 18 WiNG 5 Access Point System Reference Guide
Lease Time
4. Select Add
If adding or editing a DHCP pool, the DHCP Pool screen displays the
required parameters for the Basic Settings, Static Bindings and Advanced tabs to complete the creation of a DHCP
pool.
5. Set the following
DHCP Pool
If a lease time has been defined for a listed network pool, it displays as an
interval between 1 - 9,999,999 seconds. DHCP leases provide addresses
for defined times to various clients. If a client does not use a leased
address for the defined time, that IP address can be re-assigned to another
DHCP supported client.
to create a new DHCP pool,
Figure 9-8 DHCP Pools screen - Basic Settings tab
General parameters:
If adding a new pool, a name is required. The pool is the range of IP
addresses defined for DHCP assignment or lease. The name assigned
cannot be modified as part of the edit process. However, if the network
pool configuration is obsolete it can be deleted. The name cannot exceed
32 characters.
Edit to modify an existing pool or Delete to remove a pool.
Basic Settings tab by default. Define the