Table of Contents
Advertisement
Remote Session ID
Encapsulation
UDP Port
Source VLAN
Native VLAN
22. Select the
+ Add Row
button to set the following:
Cookie Size
Value 1
Value 2
End Point
23. Select
OK
to save the changes and overrides to the session configuration. Select
configuration.
Use the spinner control to set the remote session ID passed in the
establishment of the tunnel session. Assign an ID in the range of
1 - 4,294,967,295.
Select either IP or UDP as the peer encapsulation protocol. The default setting
is IP. UDP uses a simple transmission model without implicit handshakes.
If UDP encapsulation is selected, use the spinner control to define the UDP
encapsulation port. This is the port where the L2TP service is running.
Define the VLAN range (1 - 4,094) to include in the tunnel. Tunnel session data
includes VLAN tagged frames.
Select this option to define the native VLAN that will not be tagged
Set the size of the cookie field within each L2TP data packet. Options include
0, 4 and 8. The default setting is 0.
Set the cookie value first word.
Set the cookie value second word.
Define whether the tunnel end point is local or remote.
Device Configuration 5 - 229
Reset
to revert to the last saved
Hide quick links:
Advertisement
Table of Contents
