Motorola WiNG 5 System Reference Manual page 80

5 - 20 WiNG 5 Access Point System Reference Guide
Trust DHCP Responses
ARP header Mismatch
Validation
Trust 8021p COS values
Trust IP DSCP
16. Select the Enable checkbox within the
be used when authenticating users on this port.
17. Select OK
last saved configuration.
Select the radio button to enable DHCP trust on this port. If enabled, only
DHCP responses are trusted and forwarded on this port, and a DHCP server
can be connected only to a DHCP trusted port. The default value is enabled.
Select the radio button to enable a mismatch check for the source MAC in
both the ARP and Ethernet header. The default value is disabled.
Select the radio button to enable 802.1p COS values on this port. The default
value is enabled.
Select the radio button to enable IP DSCP values on this port. The default
value is enabled.
NOTE: Some vendor solutions with VRRP enabled send ARP packets with Ethernet SMAC
as a physical MAC and inner ARP SMAC as VRRP MAC. If this configuration is enabled, a
packet is allowed, despite a conflict existing.
802.1x Authentication field
to save the changes made to the Ethernet port's security configuration. Select
to enable a username and password pair to
Reset to revert to the