Table of Contents
Advertisement
5 - 284 WiNG 5 Access Point System Reference Guide
15.Set the following VLAN parameters to complete the MINT configuration:
VLAN
Routing Level
Link Cost
Hello Packet Interval
Adjacency Hold Time
16.Select
OK
last saved configuration.
17.Select the
Figure 5-162 Advanced Profile MINT screen - VLAN tab
Define a VLAN ID between 1 - 4,094 used by peer controllers for
interoperation when supporting the MINT protocol.
Use the spinner control to define or override a routing level of either 1 or 2.
Use the spinner control to define or override a link cost between 1 - 10,000.
The default value is 10.
Set or override an interval in either Seconds (1 - 120) or Minutes (1 - 2) for
the transmission of hello packets. The default interval is 4 seconds.
Set or override a hold time interval in either Seconds (2 - 600) or Minutes
(1 - 10) for the transmission of hello packets. The default interval is 13
seconds.
to save the updates and overrides to the MINT Protocol configuration. Select
Advanced Miscellaneous
menu item.
Reset
to revert to the
Hide quick links:
Advertisement
Table of Contents
