Table of Contents
Advertisement
15.Select
OK
when completed to update the static bindings configuration. Select
last saved configuration.
16.Select the
Advanced
tab to define additional NetBIOS and Dynamic DNS parameters.
17.The addition or edit of the network pool's advanced settings requires the following
Boot File
BOOTP Next Server
Enable Unicast
Figure 9-11 DHCP Pools screen - Advanced tab
Enter the name of the boot file used with this pool. Boot files (Boot
Protocol) can be used to boot remote systems over the network. BOOTP
messages are encapsulated inside UDP messages so requests and replies
can be forwarded. Each pool can use a different file as needed.
Provide the numerical IP address of the server providing BOOTP resources.
Unicast packets are sent from one location to another location (there's just
one sender, and one receiver). Select this option to forward unicast
messages to just a single device within the network pool.
Services Configuration 9 - 23
Reset
to revert the screen back to its
General
parameters be set:
Hide quick links:
Advertisement
Table of Contents
