Motorola WiNG 5 System Reference Manual page 190

5 - 130 WiNG 5 Access Point System Reference Guide
8. If creating a new VRRP configuration, assign a
numerical identifier, the ID identifies the access point's virtual router a packet is reporting status for.
9. Define the following VRRP
Description
Priority
Figure 5-73 VVRP screen
Virtual Router ID
General parameters:
In addition to an ID assignment, a virtual router configuration can be assigned
a textual description (up to 64 characters) to further distinguish it from others
with a similar configuration.
Use the spinner control to set a VRRP priority setting from 1 - 254. The access
point uses the defined setting as criteria in selection of a virtual router master.
The higher the value, the greater the likelihood of this virtual router ID being
selected as the master.
from (1 - 255). In addition to functioning as