Vrrp - Motorola WiNG 5 System Reference Manual

13 - 90 WiNG 5 Access Point System Reference Guide
Local Address
Peer Address
Tunnel State
Peer Host Name
Peer Control Cxn
ID
CTRL Connection
ID
Up Time
Encapsulation
Protocol
Refresh

13.3.15 VRRP


Access Point Statistics
The VRRP statistics screen displays Virtual Router Redundancy Protocol (VRRP) configuration statistics supporting
router redundancy in a wireless network requiring high availability.
To review a selected access point's VRRP statistics:
1. Select the
2. Select System
an access point for statistical observation.
3. Select VRRP
Lists the IP address assigned as the local tunnel end point address, not the
tunnel interface's IP address. This IP is used as the tunnel source IP address.
If a local address is not specified, the source IP address is chosen
automatically based on the tunnel peer IP address.
Lists the IP address of the L2TP tunnel peer establishing the tunnel
connection.
States whether the tunnel is Idle (not utilized by peers) or is currently active.
Lists the assigned peer hostname used as matching criteria in the tunnel
establishment process.
Displays the numeric identifier for the tunnel session. This is the peer
pseudowire ID for the session. This source and destination IDs are exchanged
in session establishment messages with the L2TP peer.
Displays the router ID(s) sent in tunnel establishment messages with a
potential peer device.
Lists the amount of time the L2TP connection has remained established
amongst peers sharing the L2TPv3 tunnel connection. The Up Time is
displayed in a Days: Hours: Minutes: Seconds: format. If D:0 H:0 M:0 S:0 is
displayed, the tunnel connection is not currently established.
Displays either IP or UDP as the peer encapsulation protocol. The default
setting is IP. UDP uses a simple transmission model without implicit
handshakes. Tunneling is also called encapsulation. Tunneling works by
encapsulating a network protocol within packets carried by the second
network.
Select the Refresh button to update the screen's statistics counters to their
latest value.
Statistics menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and select