Motorola WiNG 5 System Reference Manual page 685

3. Select OSPF.
4. Select the Neighbor Info
5. The Neighbor Info tab describes the following:
Router ID Displays the router ID assigned for this OSPF connection. The router is a level
three Internet Protocol packet switch. This ID must be established in every
OSPF instance. If not explicitly configured, the highest logical IP address is
duplicated as the router identifier. However, since the router identifier is not
an IP address, it does not have to be a part of any routable subnet in the
network.
Neighbor Priority Displays each listed neighbor's priority in respect to becoming the designated
router managing the OSPF connection. The designated router is the router
interface elected among all routers on a particular multi-access network
segment.
IF Name Lists the name assigned to the router interface used to support connections
amongst OSPF enabled neighbors.
Neighbor Lists the IP address of the neighbor sharing the router interface with each
Address listed router ID.
Request Count Lists the connection request count (hello packets) to connect to the router
interface, discover neighbors and elect a designated router
Retransmit Count Lists the connection retransmission count attempted in order to connect to
the router interface, discover neighbors and elect a designated router. A
designated router (DR) is the router interface elected among all routers on a
particular multi-access network segment, generally assumed to be broadcast.
tab.
Figure 13-41 Access Point OSPF - Neighbor Info tab
Statistics 12 - 79