Motorola WiNG 5 System Reference Manual page 340

5 - 280 WiNG 5 Access Point System Reference Guide
2. Select a target device from the Device Browser in the lower, left-hand, side of the UI.
3. Select Profile Overrides
4. Select Advanced
5. Select MINT Protocol
The MINT Protocol screen displays the
6. Refer to the
configuration.
Level 1 Area ID
7. Define or override the following
Designated IS Priority
Adjustment
8. Select the
spinner control used for defining or overriding a latency period between 0 - 60 seconds. The default setting has
the check box disabled.
to expand its menu items
to expand its sub menu items.
if it does not display by default.
Figure 5-158 Advanced Profile Overrides MINT screen - Settings tab
Area Identifier field to define or override the Level 1 and Level 2 Area IDs used by the profile's MINT
Select the box to enable a spinner control for setting the Level 1 Area ID
between 1 - 4,294,967,295. The default value is disabled.
Priority Adjustment
Use the spinner control to set a Designated IS Priority Adjustment setting
between -255 and 255. This is the value added to the base level DIS priority
to influence the Designated IS (DIS) election. A value of +1 or greater
increases DISiness. The default setting is 0.
Latency of Routing Recalculation
Settings tab by default.
settings:
check box (within the Shortest Path First (SPF) field) to enable the