Table of Contents
Advertisement
5 - 78 WiNG 5 Access Point System Reference Guide
19. Within the
configuration used with this OSPF route. Enable/disable admin privileges as need. They're disabled by default.
20. Use the
IP Addresses
Zero Configuration can be enabled and set as the Primary or Secondary means of providing IP addresses for the
OSPF virtual route.
21. Select
Use DHCP to Obtain IP
requested IP addresses to the OSPF route's virtual interface.
22. Select
Use DHCP to Obtain Gateway/DNS Servers
name on just this interface. Once selected, specify an IP address and mask in dot decimal format.
23. Define the
standard that enables a (LAN) to use IP addresses for internal traffic (inside) and a second set of addresses for
external (outside) traffic.
24. Select
OK
25. Select the
Figure 5-39 OSPF Virtual Interface - Basic Configuration screen
Properties
field, enter a 32 character maximum
Area to set how route addresses are created for the virtual configuration.
to use the access point's DHCP server resource as the means of providing
NAT Direction
as either Inside, Outside or None. Network Address Translation (NAT), is an Internet
to save the changes to the basic configuration. Select
Security
tab.
Description
to help differentiate the virtual interface
to learn default gateway, name servers and the domain
Reset
to revert to the last saved configuration.
Hide quick links:
Advertisement
Table of Contents
