Sensor Servers - Motorola WiNG 5 System Reference Manual

13 - 132WiNG 5 Access Point System Reference Guide
Refresh

13.3.23 Sensor Servers


Access Point Statistics
Sensor servers allow the monitor and download of data from multiple sensors and remote locations using Ethernet
TCP/IP or serial communication. Repeaters are available to extend the transmission range and combine sensors with
various frequencies on the same receiver.
To view the network address and status information of the sensor server resources available to the access point:
1. Select the
2. Select System
an access point for statistical observation.
3. Select Sensor
4. The Sensor Servers
IP Address
Port
Status
Refresh
Select the Refresh button to update the screen's statistics counters to their
latest values.
Statistics menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and select
Servers.
Figure 13-71 Access Point - Sensor Servers screen
screen displays the following:
Displays a list of sensor server IP addresses. These are the server resources
available to the access point for the management of data uploaded from
dedicated sensors.
Displays numerical port where the sensor server is listening.
Displays whether the server resource is connected or not.
Select the Refresh button to update the screen's statistics counters to their
latest values.