Load Balancing - Motorola WiNG 5 System Reference Manual

Reach
Reference IP
Address
Server IP
Address
State
Status
Time
Refresh

13.3.26 Load Balancing


Access Point Statistics
An access point load can be viewed in a graph and filtered to display different load attributes. The access point's entire
load can be displayed, as well as the separate loads on the 2.4 and 5 GHz radio bands. The channels can also be filtered
for display. Each element can either be displayed individually or collectively in the graph.
To view the access point's load balance in a filtered graph format:
1. Select the Statistics
2. Select System
access point for statistical observation.
3. Select Load Balancing.
Displays the status of the last eight SNTP messages. If an SNTP packet is
lost, the lost packet is tracked over the next eight SNTP messages.
Displays the address of the time source the access point is synchronized to.
Displays the numerical IP address of the SNTP resource (server) providing
SNTP updates to the access point.
Displays the NTP association status. This can be one of the following:
Synced - Indicates the access point is synchronized to this NTP server.
Unsynced - Indicates the access point has chosen this master for
synchronization. However, the master itself is not yet synchronized to UTC.
Selected - Indicates this NTP master server will be considered the next time
the access point chooses a master to synchronize with.
Candidate - Indicates this NTP master server may be considered for selection
the next time the access point chooses a NTP master server.
- Indicates this NTP server is a configured server.
Configured
Displays how many hops the access point is from its current NTP time source.
Displays the time of the last statistics update.
Select the Refresh button to update the screen's statistics counters to their
latest values.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and select an
Statistics 12 - 139