Motorola WiNG 5 System Reference Manual page 275

NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's Device
Overrides field and select Clear Overrides. This will remove all overrides from the device.
6. Refer to the WAN (3G) Backhaul
WAN Interface Name
Reset WAN Card
Enable WAN (3G)
7. Define or override the following authentication parameters from within the
Username
Password
Access Point Name
(APN)
Figure 5-119 Profile Overrides -WAN Backhaul screen
configuration to specify WAN card settings:
Displays the WAN Interface name for the WAN 3G Backhaul card.
If the WAN Card becomes unresponsive or is experiencing other errors click
the Reset WAN Card button to power cycle and reboot the WAN card.
Check this box to enable 3G WAN card support on the device. A supported 3G
card must be connected to the device for this feature to work.
Provide your username for authentication support by your cellular data carrier.
Provide your password for authentication support by your cellular data carrier.
Enter the name of the cellular data provider if necessary. This setting is needed
in areas with multiple cellular data providers using the same protocols such as
Europe, the middle east and Asia.
Device Configuration 5 - 215
Basic Settings field: