Motorola WiNG 5 System Reference Manual page 690

13 - 84 WiNG 5 Access Point System Reference Guide
expressed as simple unit-less numbers. This provides a dynamic process of traffic load balancing between routes
of equal cost.
6. Refer to the
Network routes support more than two routers, with the capability of addressing a single physical message to all
attached routers (broadcast). Neighboring routers are discovered dynamically using OSPF hello messages. This
use of the hello protocol takes advantage of broadcast capability. An OSPF network route makes further use of
multicast capabilities, if they exist. Each pair of routers on the network is assumed to communicate directly.
The network tab displays the network name, impacted OSPF area, cost, destination and path type.
7. Select the
An internal (or router) route connects to one single OSPF area. All of its interfaces connect to the area in which it
is located and does not connect to any other area.
8. Select the
latest values.
Network Routes tab.
Figure 13-44 Access Point OSPF - Network Routes tab
Router Routes tab.
Refresh button (within any of the four OSPF Routes tabs) to update the statistics counters to their