Motorola WiNG 5 System Reference Manual page 453

Incoming Interface
5. Select Add or Edit to create or modify a route-map configuration.
Figure 7-3 Policy Based Routing screen - Add a Route Map
6. Use the spinner control to set a numeric precedence (priority) for this route-map. An incoming packet is matched
against the route-map with the highest precedence (lowest numerical value).
7. Refer to the Match Clauses
DSCP
Role Policy
User Role
Access Control List
WLAN
Display the name of the access point WWAN or VLAN interface on which
the packet is received for the listed PBR policy.
field to define the following matching criteria for the route-map configuration:
Select this option to enable a spinner control to define the DSCP value
used as matching criteria for the route map.
Lists each policy's role policy used as matching criteria.
Lists each policy's user role used as matching criteria.
Use the drop-down menu to select an IP based ACL used as matching
criteria for this route-map.
Use the drop-down menu to select the access point WLAN used as
matching criteria for this route-map.
Network Configuration 7 - 5