Table of Contents
Advertisement
4. Refer to the
Trap Receiver
Add Row +
as required to add additional trap receivers. Select the
IP Address
Port
Version
5. Select
OK
to update the SNMP Trap configuration. Select
table to set the configuration of the external resource receiving trap information. Select
Set the IP address of the external server resource receiving SNMP traps on
behalf of the access point.
Set the server port dedicated to receiving traps. The default port is 162.
Set the SNMP version for sending SNMP traps. SNMPv2 is the default.
Management Access 10 - 15
Delete
icon to permanently remove a trap receiver.
Reset
to revert to the last saved configuration.
Hide quick links:
Advertisement
Table of Contents
