Table of Contents
Advertisement
5 - 86 WiNG 5 Access Point System Reference Guide
5. Select
Add
VLAN configuration or
6. If adding a new Bridge VLAN configuration, use the spinner control to define a
1 - 4095. This value must be defined and saved before the General tab can become enabled and the remainder of
the settings defined.
7. If creating a new Bridge VLAN, provide a
configuration to help differentiate it from other VLANs with similar configurations.
8. Define the following
Bridging Mode
to define a new Bridge VLAN configuration,
Delete
to remove a VLAN configuration.
Figure 5-44 Bridge VLAN Configuration screen
Extended VLAN Tunnel
Specify one of the following bridging mode for use on the VLAN.
• Automatic: Select Automatic mode to let the access point determine the
best bridging mode for the VLAN.
• Local: Select Local to use local bridging mode for bridging traffic on the
VLAN.
• Tunnel: Select Tunnel to use a shared tunnel for bridging traffic on the
VLAN. Tunnel must be selected to successfully create a mesh connection
between two Standalone APs.
• isolated-tunnel: Select isolated-tunnel to use a dedicated tunnel for
bridging traffic on the VLAN.
Edit
to modify the configuration of an existing Bridge
Description
(up to 64 characters) unique to the VLAN's specific
parameters:
VLAN ID
between
Hide quick links:
Advertisement
Table of Contents
