Table of Contents
Advertisement
6 - 70 WiNG 5 Access Point System Reference Guide
Maximum Roamed
Wireless Clients
Reserved for Roam
16.Select the
QoS policy.
17.Set the following
Maximum number of
wireless clients
allowed
When wireless
client count
exceeds the above
limit
Maximum multicast
streams per client
Set the number of low priority supported wireless clients allowed to roam
to a different access point radio. Select from a range of 0-256 clients. The
default value is 10 roamed clients.
Set the roam utilization (in the form of a percentage of the radio's
bandwidth) allotted to admission control for clients who have roamed to a
different access point radio. The available percentage range is from
0-150%, with 150% available to account for over-subscription. The default
value is 10%.
Multimedia Optimization
Figure 6-25 Radio QoS Policy screen - Multimedia Optimizations tab
Accelerated Multicast
Specify the maximum number of wireless clients (between 0 and 256)
allowed to use accelerated multicast. The default value is 25.
When the wireless client count using accelerated multicast exceeds the
maximum number set the radio to either Reject new wireless clients or to
Revert existing clients to a non-accelerated state. Reject is the default
setting.
Specify the maximum number of multicast streams (between 1 and 4)
wireless clients can use. The default value is 2.
tab to configure advanced multimedia QoS configuration for the radio's
settings:
Hide quick links:
Advertisement
Table of Contents
