Motorola WiNG 5 System Reference Manual page 272

5 - 212 WiNG 5 Access Point System Reference Guide
22. Refer to the
frames are aggregated by the access point radio.
A-MPDU Modes
Minimum Gap
Between Frames
Received Frame Size
Limit
Transmit Frame Size
Limit
23. Use the Aggregate MAC Service Data Unit (A-MSDU)
A-MSDU mode.
Available modes include Receive Only and Transmit and Receive. Using Transmit and Receive, frames up to 4 KB
can be sent and received. The buffer limit is not configurable.
Figure 5-118 Profile Overrides - Access Point Radio Advanced Settings tab
Aggregate MAC Protocol Data Unit (A-MPDU)
Use the drop-down menu to define the A-MPDU mode. Options include
Transmit Only, Receive Only, Transmit and Receive and None. The default value
is Transmit and Receive. Using the default value, long frames can be both sent
and received (up to 64 KB). When enabled, define either a transmit or receive
limit (or both).
Use the drop-down menu to define the minimum gap between A-MPDU frames
(in microseconds). The default value is 4 microseconds.
If a support mode is enable allowing A-MPDU frames to be received, define an
advertised maximum limit for received A-MPDU aggregated frames. Options
include 8191, 16383, 32767 or 65535 bytes. The default value is 65535 bytes.
Use the spinner control to set limit on transmitted A-MPDU aggregated
frames. The available range is between 0 - 65,535 bytes). The default value is
65535 bytes.
field to define or override how MAC service
drop-down menu to set or override the supported