Table of Contents
Advertisement
6 - 34 WiNG 5 Access Point System Reference Guide
4. Define the following
Enable
Client-to-Client
Communication
Wireless Client
Power
Wireless Client Idle
Time
Max Firewall
Sessions per Client
Figure 6-12 WLAN Client Settings screen
Client Settings
for the WLAN:
Select this option to allow client to client communication within this WLAN.
The default is enabled, meaning clients are allowed to exchange packets with
other clients. Disabling this setting does not necessarily prevent clients on
other WLANs from sending packets to this WLAN, but as long as this setting
is disabled on the other WLAN, clients are not permitted to interoperate.
Use this parameter to set the maximum transmit power (between 0 - 20 dBm)
available to wireless clients for transmission. The default value is 20 dBm.
Set the maximum amount of time wireless clients are allowed to be idle within
this WLAN. Set the idle time in either Seconds (60 - 86,400), Minutes (1 -
1,440), Hours (0 - 24) or Days (0 - 1). When this setting is exceeded, the client
is no longer able to access resources and must re-authenticate. The default
value is 1,800 seconds.
Select this option to set the maximum number of sessions (between 10 -
10,000 clients) over the Firewall. When enabled, this parameter limits the
number of simultaneous sessions allowed by the Firewall per wireless client.
This feature is disabled by default.
Hide quick links:
Advertisement
Table of Contents
