Table of Contents
Advertisement
Routing Level
IPSec Secure
IPSec GW
9. Select
+ Add Row
as needed to populate the table with IP Addresses or Hostnames of adoption resources.
10.
Select OK
to save the changes made to the general profile configuration. Select
configuration.
Use the spinner controller to set the routing level (either 1 or 2) for the Virtual
Controller link. The default setting is 1.
Define whether a IPSec secure controller list is used in the controller adoption.
An IPSec secure link is disabled by default.
Specify the IP address or hostname of the adopting controller.
Device Configuration 5 - 13
Reset
to revert to the last saved
Hide quick links:
Advertisement
Table of Contents
