Setting Up The Vrrp Router Interface; Configuring The Vrrp Router Interface - Hirschmann PowerMICE User Manual

VRRP
6.1.3

Setting up the VRRP router interface

V Click on the "Wizard" on the bottom right.
V In the table in the Wizard window, select a port row and enter the vir-
tual router ID in the VRID row.
V Click on "Next".
V In the wizard window, you enter:
– the priority
– the primary IP address
– the authentication type
– the authentication key
– the advertisment interval.
Select the preempt mode if you require.
Activate the VRRP function by selecting the "Function" field.
V Click on "Finish" to transfer the VRRP router interface into the VRRP
router interface table.
or
V Click on "Next" to enter additional IP addresses in the "Associated IP
addresses" (Multinetting) window. Click then on "Finish" to transfer
the VRRP router interface into the VRRP router interface table.

6.1.4 Configuring the VRRP router interface

V Double-click on a cell in the table and edit the entry, or
right-click on a cell and select a value..
V As an alternative to editing directly in the table, you can mark a row
in the table and use the Wizard to edit it.
86
6.1 Configuring the VRRP
Redundanz L3P
Release 3.0 01/07