Polycom VVX 101 Series User Manual page 95

VVX Camera LED Indicators
LED State
No LED
Flashes red and green
Flashes amber and green
Flashes green
Green
Amber
VVX Camera Messages
Message
VVX Camera attached. Firmware sync in progress, do
not remove camera.
VVX Camera firmware sync complete. Camera ready.
VVX Camera firmware sync complete. Contact
administrator to enable video.
VVX Camera firmware sync complete. Camera
rebooting.
VVX Camera firmware sync complete. Video available
when next idle.
VVX Camera attached, camera ready.
VVX Camera attached. Contact administrator to enable
video.
Polycom, Inc.
Phone State
One of the following:
● Phone has no power
● Camera shutter is closed
Camera is booting up
Camera firmware is updating
Incoming video call
Video call is connected
One of the following:
● Incoming call (no video or audio-only)
● Outgoing call
● Audio call is connected
● Video is muted
● Held call
● Camera shutter is open, but video is not
enabled and camera is not selected
Action
Your camera is upgrading. Do not remove your camera
during this process. The upgrade is complete when you
receive a message stating that either "firmware sync
complete" or "upgrade failed".
Indicates that your camera is ready to use.
Indicates that your camera is ready to use. However,
your phone is not enabled to send and receive video.
Contact your system administrator to enable video calls.
Indicates that the camera firmware sync is finished, and
your camera is in the process of rebooting.
Indicates that your camera is ready to use for your next
video call.
Indicates that your camera is ready to use.
Indicates that your camera is ready to use. However,
your phone isn't enabled to send and receive video.
Contact your system administrator to enable video calls.
Video Calls
5