Using The Indirect Method; Connect Using The Indirect Method - Polycom VVX 101 Series User Manual

Using the Indirect Method

If your phone and computer are connected through a switch, use the indirect method to enable the PDC.
This method requires you to find your computer's IP address and manually enter your computer access
credentials.
Find Your Computer's IP Address
You can find your computer's IP address using the Command Prompt.
T
ASK
1 Click Start > All Programs > Accessories > Command Prompt.
2 In the Command Prompt, type ipconfig and press Enter.
3 Note your server address on the IPv4 Address line, as shown next.

Connect Using the Indirect Method

After you find your phone's IP address, you can start the PDC program and connect your phone to your
computer using the indirect method.
T
ASK
1 Click Start > Programs > Polycom > Polycom Desktop Connector.
The PDC icon is displayed as an active program on your taskbar as shown next.
2 On your phone, navigate to Settings > Basic >PDC Configuration.
For VVX 1500 phones, navigate to Menu > Settings > Basic >PDC Configuration.
3 From the PDC Configuration screen, set the Status field to Enabled.
4 In the Phone Orientation field, specify whether your phone is to the left or right of your computer
monitor.
Polycom, Inc.
Phone Accessories and Computer Applications
10