Resume A Held Madn Call; Enabling Privacy; Enable Privacy; Disable Privacy Temporarily - Polycom VVX 101 Series User Manual

» Select the End Call soft key, or place the handset in the cradle.
Your connection to the bridge call is ended, and the other call participants remain on the call.

Resume a Held MADN Call

Any MADN member can resume a held call on the shared line. When an active call is placed on hold on the
shared line, all group members are notified of the call's new status by a flashing red LED light on the line
key on all members' phones, if enabled by your system administrator.
When a held call is resumed by another MADN member, the other group members are notified of the call's
new status with a steady red LED light on the line key on the members' phone.
» Do one of the following:
 Select the corresponding line key and lift the handset.
 Press and hold the corresponding line key and select Resume.

Enabling Privacy

Any MADN member can temporarily enable privacy for an active or bridge call on a public shared line using
privacy codes or privacy soft keys configured by your system administrator. Additionally, MADN members
can use privacy codes and soft keys to temporarily disable privacy on an active call on a private shared line.
The following are three types of privacy codes that you can use to enable and disable privacy on a shared
line:
● Privacy Access (PRV) code Enables privacy for an active call on a public line.
● Privacy Release Activation (PRLA) code Disables privacy for an active call on a private shared line.
● Privacy Release Cancel (PRLC) code
When a shared line is configured as private or when privacy is enabled on an active call, bridging is disabled
and other MADN members cannot barge in on an active call on the shared line.

Enable Privacy

After you enable privacy for an active call on a public shared line, you cannot disable privacy for the call.
You can allow other MADN members to join the active call by transferring the call or initiating a conference
call.
» During an active call, do one of the following:
 Select Transfer and dial the PRV code given to you by your administrator
For example, dial *91.
 Select the Priv soft key, if enabled.
A confirmation tone plays, and the call is resumed automatically.

Disable Privacy Temporarily

You can temporarily disable privacy for an active call on a private shared line to allow other MADN members
to join the call.
Polycom, Inc.
Re-enables privacy for an active call on a private shared line.
Shared Lines
6