Handling A Mixture Of Video And Audio-Only Calls; Place Audio-Only Calls - Polycom VVX 101 Series User Manual

 Tap Video, and select Full Screen.
Full-screen video displays. Call details display at the bottom of the screen, along with an icon that you
can select to exit full screen mode, as displayed next. The call details display for five seconds, and
then disappear. To see the details again, tap the screen.
R :
ELATED INFORMATION
Display All Video Calls in Full Screen Mode

Handling a Mixture of Video and Audio-Only Calls

When you have multiple calls, you can easily manage a video call from the Calls screen. From the Calls
screen, you can quickly identify the video call by the video stream that is displayed next to the call details,
as shown next.
Figure 9: Video calls on the Calls screen
If two or more calls are video calls, only the active call shows a video stream of the far side. All other video
calls show a paused grayscale image of the far side. If you resume a held video call, the held call becomes
active and displays an active video stream again.

Place Audio-Only Calls

Your system administrator can determine how your phone handles audio and video. You can change the
settings on your phone to handle audio and video calls in one of the following ways:
● Video-enabled All calls you place or answer are video calls. This means that the person you call
sees your video on his or her phone, and you see video on your phone from the other person on the
call.
● Audio only All calls are audio only and do not display video information. Your phone screen does
not display video in the Active Call screen, and you do not have the option to send video. If the person
you call sends video, you do not see them.
Polycom, Inc.
Video Calls
15