Enable Privacy On A Bridge Call; Alcatel-Lucent Shared Call Appearance; Placing A Scap Call; Answering A Scap Call - Polycom VVX 101 Series User Manual

T
ASK
1 During an active call, press the PRLA soft key or select Hold and dial the PRLA code given to you
by your administrator.
For example, dial *921.
A confirmation tone plays, and the call is resumed automatically. Privacy is disabled for the call and
any member can barge in on the call.
2 After other MADN members have joined the call, press the PRLA soft key or select Hold and dial
the PRLC code given to you by your administrator.
For example, dial *922.
A confirmation tone plays, and the call is resumed automatically.

Enable Privacy on a Bridge Call

You can enable privacy on a bridge call to prevent additional MADN members from barging into the call.
» During a bridge call, select Transfer and dial the PRV code or select the Privacy soft key, if enabled.
A confirmation tone plays when privacy is enabled, and the call is resumed automatically. The bridge
call is now private and additional MADN members are not allowed to join the call.

Alcatel-Lucent Shared Call Appearance

When your phone is registered with the Alcatel-Lucent CTS, you can use the Shared Call Appearance
(SCAP) feature to share a single line with other contacts as a member of a group. System administrators
assign members to SCAP groups.
This feature is not supported on VVX 101 and 1500 phones. Check with your system administrator to find
out if this feature is available on your phone.
Any SCAP group member can place, answer, hold, or resume calls on the line. SCAP group members can
also bridge in on a call on the shared line. Additionally, all group members can view the status of a call on
the shared line on their phones. Each line supports up to 21 call appearances.

Placing a SCAP Call

Any group member can place a call on the shared line. When a member places a call on the shared line,
the other members are notified with a steady red LED light on the line key on members' phones. Multiple
group members can place outgoing calls while a call is in progress on the shared line.

Answering a SCAP Call

Any incoming call to the shared line rings on all group members' phones simultaneously, the call is displayed
on all members' screens, and a green LED light flashes on the line key.
Any group member can respond to an incoming call to the shared line. When a group member answers an
incoming call, the line key's LED indicator on all phones changes to a steady red light to indicate the call
was answered. Members can also view the status of a call on the shared line by pressing and holding the
corresponding line key for one second. The call's status and the Bridge In soft key display for five seconds.
Polycom, Inc.
Shared Lines
7