Set A Protocol For Placing Calls Automatically; Answering Audio Calls; Answer An Incoming Call - Polycom VVX 101 Series User Manual

2 In the Dialer, tap Use H.323 to place an H.323 call.
H.323 is displayed in the number field. Your phone uses the H.323 protocol for all subsequent calls
until you select a different protocol.
3 Enter your contact's H.323 URL name.
For example, VVX500@100.100.100.100.
R :
ELATED INFORMATION
Place Audio-Only Calls

Set a Protocol for Placing Calls Automatically

Your system administrator can set up your phone so that you can enable it to automatically select the
protocol to use for all calls.
When you place calls from call lists or directories, your phone automatically chooses the protocol to use
based on the information in the call list or directory. When you add a contact to your Contact Directory, you
can specify the protocol the contact uses to handle calls. This enables your phone to automatically use the
correct protocol when you dial the contact.
T
ASK
1 Tap New Call.
2 In the Dialer, tap Use Auto to enable your phone to automatically select the protocol to use.
Your phone uses the selected protocol for all subsequent calls until you select a different protocol.
R :
ELATED INFORMATION
Managing the Contact Directory

Answering Audio Calls

When you receive an incoming call on your phone, you can choose to answer the call in various ways,
including answering calls in the Incoming Calls screen, in the Calls screen, during a call, automatically, and
using a headset or the speakerphone.

Answer an Incoming Call

When you receive an incoming call, your phone rings and an Incoming Call screen is displayed, as shown
next. In the Incoming Call screen, you can choose to answer or reject the incoming call.
Figure 1: Incoming Call window
Polycom, Inc.
Audio Calls
9