Enable Bluetooth And Connect A Headset; Managing Calls With Your Bluetooth Headset - Polycom VVX 101 Series User Manual

Enable Bluetooth and Connect a Headset

In order to use a Bluetooth headset with your phone, you need to enable Bluetooth, pair your headset, and
connect your Bluetooth device to your phone. You can pair up to four Bluetooth headsets with your phone;
however, you can connect only one headset at a time.
The following instructions are intended as a guide, and do not apply to all Bluetooth devices. You can usually
find instructions for your headset on the device manufacturer's web site.
T
ASK
1 Navigate to Settings > Basic > Bluetooth Settings > Bluetooth Radio.
The Bluetooth Radio screen is displayed.
2 Tap On.
The Bluetooth icon
your Bluetooth headset.
3 Turn your Bluetooth headset on and place the headset in Discovery mode.
Refer to your headset documentation for information on how to place your headset in discovery
mode.
4 Navigate to Settings > Basic > Bluetooth Settings > Manage BT Headsets.
5 Tap Scan to find your headset.
All nearby devices in discovery mode are added to the list, and the Bluetooth icon
to each unpaired headset.
6 Select your headset and tap Add to begin the pairing process.
After your headset is added, the Bluetooth Available icon
7 Select your headset and select Connect.
The Bluetooth Headset icon
connected. The Bluetooth Headset icon is also displayed in the status bar. If you select the icon, the
Bluetooth Settings screen is displayed.
R :
ELATED INFORMATION
Bluetooth Headset

Managing Calls with Your Bluetooth Headset

When your Bluetooth headset is turned on, paired, and connected with your phone, you can perform the
following tasks:
● Use the headset to handle calls, including muting and adjusting the call volume.
● Initiate and end calls on your headset by pressing the Headset key
headset.
● Switch to handset or speakerphone mode during a headset call by picking up the handset or pressing
the Speakerphone key
When you turn the headset off, the headset is no longer connected but remains paired to your phone. When
you turn the headset back on, the headset is reconnected.
Polycom, Inc.
is displayed in the status bar. After the icon displays, you can pair and connect
is displayed next to your headset after the headset is paired and
.
Phone Accessories and Computer Applications
is displayed.
, or using a control on the
is displayed next
7