Connecting Polycom Vvx Expansion Modules To Your Phone - Polycom VVX 101 Series User Manual

2 Connect the adapter to your computer using the Ethernet cable and USB cable.
If your computer does not have a USB port, you can use the power adapter that comes with the Wi-Fi
adapter for power.
3 Wait until both the Power and LAN LEDs on the Wi-Fi adapter are solid green.
4 Make sure the computer gets the IP address.
5 Open your browser.
The NETGEAR WNCE2001 Wi-Fi adapter setup page is displayed automatically. Refer to the
NETGEAR WNCE2001 User Guide
Adapter set up page.
6 Follow the instructions on the setup page.
7 After completing the setup, disconnect the Ethernet and USB cables from your computer.
8 Connect the Ethernet and USB cables on the WNCE2001 to the VVX phone.
If your VVX phone doesn't have a USB port or the USB port is disabled, you can use the power
adapter that comes with the Wi-Fi adapter to power the unit.
Note: Wi-Fi Protected Setup (WPS) is a simple and secured way to connect a device to an existing
network. If you have a NETGEAR router, this feature is called Push 'N' Connect. Look for the
symbol on the router to make sure the NETGEAR router supports WPS. For non-NETGEAR
routers, refer to the user manual to determine if the router supports WPS.
Connecting Polycom VVX Expansion Modules to Your
Phone
The Polycom VVX Expansion Modules are consoles you can connect to Polycom VVX Business Media
phones to add additional lines. VVX Expansion Modules enable you to handle large call volumes on a daily
basis and expand the functions of your phone.
Polycom, Inc.
Phone Accessories and Computer Applications
if you open your browser and do not see the WNCE2001 Wi-Fi
16