Assembling The Final Drive Unit; Bearings - APRILIA pegaso 650 i.e. Service Manual

Pegaso 650 I.E.

7.3.16 ASSEMBLING THE FINAL DRIVE UNIT

BEARINGS

If provided:
N
Remove the final drive unit bearings, see 7.3.15 (DIS-
ASSEMBLING THE FINAL DRIVE UNIT BEARINGS).
Work from the right-hand side:
N
Insert the inner spacer (1).
NOTE Have the appropriate special tool m to hand:
– aprilia part# 8140180 (Kit for bearings in the range
Ø10 mm to Ø 30 mm).
N
Use a special pad to insert the bearing (2).
NOTE
The complete insertion of the bearing (2) will
bring the following components into contact:
– inner spacer (1);
– left bearing (2).
N
Insert the elastic ring (3).
NOTE
The elastic ring (3) is provided only on the right
side of the final drive unit.
N
Install a new seal (4).
N
Insert the right spacer (5) with the longer diameter to-
wards the outside of the vehicle.
Release 00/2002-02
CHASSIS
7 - 53
- 00