Removing The Clutch Lever - APRILIA pegaso 650 i.e. Service Manual

CHASSIS

7.1.15 REMOVING THE CLUTCH LEVER

Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
COMPLETE REMOVAL
N
Remove the left hand guards, see 7.1.13 (REMOVING
THE HAND GUARDS).
N
Withdraw the protection element (1).
N
Loosen the ring nut (2).
N
Screw the adjuster (3) completely.
N
Make the slots (4) (5) (6) coincide.
a
CAUTION
Let the engine cool down until it reaches room tem-
perature.
N
Release the clutch cable (6) (engine side) from the cou-
pling (7).
N
Disengage the clutch cable (8) from the clutch lever (9).
N
Unscrew and remove the safety switch (10).
NOTE
Before removing the U bolt (11), mark its posi-
tion on the handlebar so it can be refitted in the right
place.
N
Unscrew and remove the two screws (12).
U-bolt screw driving torque: 10 Nm (1.0 kgm).
N
Remove the U-bolt (11) (complete with rear-view mir-
ror) and take the clutch control (13).
PARTIAL REMOVAL
NOTE
Before removing the U bolt (11), mark its posi-
tion on the handlebar so it can be refitted in the right
place.
N
Unscrew and remove the two screws (12).
U-bolt screw driving torque: 10 Nm (1.0 kgm).
N
Remove the U-bolt (11), complete with rear-view mir-
ror.
a
CAUTION
Do not force pipes and cables.
N
Partially remove the clutch control (13), complete with
hand guard.
7 - 14
- 00
Pegaso 650 I.E.
Release 00/2002-02